최신VMware Advanced VMware Cloud Foundation 9.0 Architect - 3V0-12.26무료샘플문제
문제1
An enterprise uses a shared business operations platform supporting manufacturing sites across several continents. The network links between sites are unreliable, often degrading or dropping entirely during peak traffic periods. The customer is worried that order-processing may slow under heavy load, but they accept reduced responsiveness as long as core functions never disappear. When cut off from the headquarters, each site must continue running its local production systems.
Based on the above scenario, what are the two design qualities the architect needs to focus on in the VMware Cloud Foundation (VCF) design? (Choose two.)
An enterprise uses a shared business operations platform supporting manufacturing sites across several continents. The network links between sites are unreliable, often degrading or dropping entirely during peak traffic periods. The customer is worried that order-processing may slow under heavy load, but they accept reduced responsiveness as long as core functions never disappear. When cut off from the headquarters, each site must continue running its local production systems.
Based on the above scenario, what are the two design qualities the architect needs to focus on in the VMware Cloud Foundation (VCF) design? (Choose two.)
정답: B,D
설명: (ITDumpsKR 회원만 볼 수 있음)
문제2
A customer is planning to implement a VMware Cloud Foundation (VCF) environment to support a mix of production and development virtualized workloads. The customer intends to use vSAN as the principal storage solution for both environments. During the initial planning meeting, the following requirements were identified:
* The production environment requires high availability and fault tolerance, with at least 1 copy of each VM ' s data.
* The development environment needs to be able to tolerate availability, with 2 copies of each VM ' s data.
* The customer is planning to deploy 15 ESX hosts in the cluster.
* The customer expects to onboard 475 virtual machines in the production environment and 250 VMs in the development environment, with an average disk size of 275 GB per VM.
* The customer requires storage policies that provide redundancy and high performance in the development environment but can afford lower redundancy and performance in the production environment.
Given these requirements, which two factors will impact the storage design for this VCF implementation?
(Choose two.)
A customer is planning to implement a VMware Cloud Foundation (VCF) environment to support a mix of production and development virtualized workloads. The customer intends to use vSAN as the principal storage solution for both environments. During the initial planning meeting, the following requirements were identified:
* The production environment requires high availability and fault tolerance, with at least 1 copy of each VM ' s data.
* The development environment needs to be able to tolerate availability, with 2 copies of each VM ' s data.
* The customer is planning to deploy 15 ESX hosts in the cluster.
* The customer expects to onboard 475 virtual machines in the production environment and 250 VMs in the development environment, with an average disk size of 275 GB per VM.
* The customer requires storage policies that provide redundancy and high performance in the development environment but can afford lower redundancy and performance in the production environment.
Given these requirements, which two factors will impact the storage design for this VCF implementation?
(Choose two.)
정답: A,B
설명: (ITDumpsKR 회원만 볼 수 있음)
문제3
An architect is planning an installation of VMware Cloud Foundation (VCF) Automation which was not deployed during the initial VCF deployment. Currently, the management cluster is based on three ESX hosts and reports CPU contention which is not recommended for VCF Automation. There are already 10 workload domains with dedicated NSX instances deployed in this VCF instance.
To mitigate VCF Automation performance issues, which two design decisions will meet the requirements?
(Choose two.)
An architect is planning an installation of VMware Cloud Foundation (VCF) Automation which was not deployed during the initial VCF deployment. Currently, the management cluster is based on three ESX hosts and reports CPU contention which is not recommended for VCF Automation. There are already 10 workload domains with dedicated NSX instances deployed in this VCF instance.
To mitigate VCF Automation performance issues, which two design decisions will meet the requirements?
(Choose two.)
정답: C,E
설명: (ITDumpsKR 회원만 볼 수 있음)
문제4
An architect is designing a VMware Cloud Foundation (VCF) solution for a customer who needs to provide a standardized architecture across multiple geographically dispersed locations.
During workshops with the customer, the architect gathered the following information:
* There are ten locations in scope for the initial design, with plans for an additional five to be added within the next two years.
* One location is a dedicated datacenter (DC1) owned by the customer.
* The network links between the datacenter and all branch locations have a maximum latency of 100ms and a minimum bandwidth of 10 Mbps.
* Each of the remaining locations for the design are customer branch locations.
* Each branch location operates independently, and all compute resources should be dedicated to the branch.
* There is existing NFS storage available at each of the locations.
Based on this information, the architect decides that VCF Edge design patterns would be the best approach for meeting the customer ' s requirements.
Which two design decisions should the architect include? (Choose two.)
An architect is designing a VMware Cloud Foundation (VCF) solution for a customer who needs to provide a standardized architecture across multiple geographically dispersed locations.
During workshops with the customer, the architect gathered the following information:
* There are ten locations in scope for the initial design, with plans for an additional five to be added within the next two years.
* One location is a dedicated datacenter (DC1) owned by the customer.
* The network links between the datacenter and all branch locations have a maximum latency of 100ms and a minimum bandwidth of 10 Mbps.
* Each of the remaining locations for the design are customer branch locations.
* Each branch location operates independently, and all compute resources should be dedicated to the branch.
* There is existing NFS storage available at each of the locations.
Based on this information, the architect decides that VCF Edge design patterns would be the best approach for meeting the customer ' s requirements.
Which two design decisions should the architect include? (Choose two.)
정답: A,B
설명: (ITDumpsKR 회원만 볼 수 있음)
문제5
An architect is developing a VMware Cloud Foundation (VCF) solution for a single tenant with the following requirements:
* The configuration must prevent advertisements from being dropped by the Border Gateway Protocol (BGP) loop detection check.
* High bandwidth (40+ Gbps) is needed to support workload traffic.
* Workloads use a mixture of virtual machines and containers.
* Bidirectional Forwarding Detection (BFD) cannot be used due to limitations in the upstream switches.
* Workload traffic is divided between tenants, and packets should not ingress/egress from the same endpoints.
* There is only enough existing hardware to support one Workload Domain.
The architect makes a design decision to use NSX VPC Full Services Model based on the information provided.
When designing the network architecture to support this solution, which two elements should be considered as part of the physical network design? (Choose two.)
An architect is developing a VMware Cloud Foundation (VCF) solution for a single tenant with the following requirements:
* The configuration must prevent advertisements from being dropped by the Border Gateway Protocol (BGP) loop detection check.
* High bandwidth (40+ Gbps) is needed to support workload traffic.
* Workloads use a mixture of virtual machines and containers.
* Bidirectional Forwarding Detection (BFD) cannot be used due to limitations in the upstream switches.
* Workload traffic is divided between tenants, and packets should not ingress/egress from the same endpoints.
* There is only enough existing hardware to support one Workload Domain.
The architect makes a design decision to use NSX VPC Full Services Model based on the information provided.
When designing the network architecture to support this solution, which two elements should be considered as part of the physical network design? (Choose two.)
정답: A,D
설명: (ITDumpsKR 회원만 볼 수 있음)
문제6
An architect is designing a new VMware Cloud Foundation (VCF) Workload Domain for a software development organization. During the requirements gathering phase, the customer has provided the following requirements:
* The platform must enable multiple development teams to provision both Virtual Machines (VM) and Kubernetes clusters within the same self-service project space.
* Each development team must be separated at network level to ensure isolation within the cloud network.
* The solution must also leverage auto SNAT for automated outbound connectivity for workloads.
Which NSX Tier-0 Gateway HA Mode must the architect choose?
An architect is designing a new VMware Cloud Foundation (VCF) Workload Domain for a software development organization. During the requirements gathering phase, the customer has provided the following requirements:
* The platform must enable multiple development teams to provision both Virtual Machines (VM) and Kubernetes clusters within the same self-service project space.
* Each development team must be separated at network level to ensure isolation within the cloud network.
* The solution must also leverage auto SNAT for automated outbound connectivity for workloads.
Which NSX Tier-0 Gateway HA Mode must the architect choose?
정답: C
설명: (ITDumpsKR 회원만 볼 수 있음)
문제7
A national cyber-defense enterprise operates a VMware Cloud Foundation (VCF) environment with strict organization isolation based solely on Virtual Private Cloud (VPC) constructs. They have been recently audited, and some new requirements were presented:
* Zero lateral movement between VPCs at both Layer 2 and Layer 3.
* No shared security objects between tenants.
* Strict identity-based access segregation for all VCF Automation API consumers.
* All enforcement must remain local to each VPC.
Which two design decisions correctly address the design trait of security based on the new requirements?
(Choose two.)
A national cyber-defense enterprise operates a VMware Cloud Foundation (VCF) environment with strict organization isolation based solely on Virtual Private Cloud (VPC) constructs. They have been recently audited, and some new requirements were presented:
* Zero lateral movement between VPCs at both Layer 2 and Layer 3.
* No shared security objects between tenants.
* Strict identity-based access segregation for all VCF Automation API consumers.
* All enforcement must remain local to each VPC.
Which two design decisions correctly address the design trait of security based on the new requirements?
(Choose two.)
정답: C,D
설명: (ITDumpsKR 회원만 볼 수 있음)