최신Alcatel-Lucent Services Architecture - 4A0-104무료샘플문제

A. config>service>ies# interface to CE create

B. config>service>ies# interface to CE

C. config>service>ies# interface "to-CE" customer customer-id create

D. config>service>ies# interface "to-CE" create

A. A VLAN tag of 0 is added as the provider VLAN tag.

B. The frame is dropped.

C. The frame is forwarded with no provider VLAN tag.

D. The service ID is added as the provider VLAN tag.

A. Option A

B. Option C

C. Option B

D. Option D

A. vc-type none

B. vc-type ether

C. vc-type null

D. vc-type vlan

A. Multiple MP-BGP sessions are required to carry VPN-IPv4 and VPN-IPv6 routes.

B. PE routers must support both IPv4 and IPv6 addresses; customer routers can use either one

C. All of the above statements are true.

D. In 6VPE, the provider core routers are IPv6-unaware.

E. All of the above statements are false.

F. In 6VPE, MP-BGP is used to advertise IPv6 prefixes and the associated VPRN label.

A. MP-BGP

B. BGP

C. LDP

D. MPLS

A. A PE uses a VRF to maintain forwarding information.

B. A PE uses the same VRF table for all the VPRN services on it.

C. Information for VRFs can be advertised between PEs by MP-BGP.

D. A PE uses a VRF to route traffic to CEs.

A. An export policy is required on PE1 to advertise routes to CE1.

B. No export policy is required on PE2 or CE2 due to the static routes.

C. An export policy is required on CE1 to advertise local routes to PEL

D. An export policy is required to advertise routes between the PE routers.

A. Each PE has a VRF for each VPRN service provisioned on the router.

B. All of the above.

C. The VRF is a virtual router on the PE router that contains the customer's routes for the VPRN

D. Each PE maintains multiple VRFs based on the number of PE peers it connects to.

E. Only A and B

F. Only A and C.

A. An IES interface has an IP address assigned to it.

B. IES does not support QoS.

C. A virtual route table must be configured for an IES service.

D. IES has a configurable IP-MTU

A. Acts as a logical way to direct traffic from one service to another on a single node.

B. Acts as a logical way to direct traffic from one SAP to another on a single node.

C. Acts as a logical way to direct traffic from services on one router to services on another.

D. Acts as a logical way to direct traffic from one access port to another.

A. Isp-ping

B. Isp-trace

C. ping

D. traceroute

A. By default, a 7750 SR advertises all routes in the VRF to a CE router.

B. By default, a 7750 SR does not advertise all routes in the VRF to other PE routers.

C. The default 7750 SR behavior describes all routes in a VRF that are advertised to other PE routers.

D. By default, a 7750 SR does not advertise all routes in the VRF to a CE router.

A. An SDP is used to direct traffic for a service from one router to another.

B. All services bound to the same SDP must be the same service type.

C. Any operation on an SDP will affect all services bound to that SDP.

D. All services bound to the same SDP will have the same transport encapsulation.