최신IBM Virtualization Technical Support for AIX and Linux - v2 - C4040-109무료샘플문제
문제1
A Power Systems server has two HMCs connected to its Flexible Service Processor (FSP). It is decided to upgrade one of them to a later hardware version. The 7042-CR3 is disconnected and the new 7042-CR6 is connected in its place. The new HMC successfully discovers the managed server but some operations including DLPAR are failing.
Which action will allow the managed server and HMC to establish new RMC configurations?
A Power Systems server has two HMCs connected to its Flexible Service Processor (FSP). It is decided to upgrade one of them to a later hardware version. The 7042-CR3 is disconnected and the new 7042-CR6 is connected in its place. The new HMC successfully discovers the managed server but some operations including DLPAR are failing.
Which action will allow the managed server and HMC to establish new RMC configurations?
정답: C
문제2
An LPAR requires more disk space so an application logging filesystem in datavg can be extended. There is an unused LUN, hdisk5, on the VIO Server.
Which command (or commands) will map the drive directly to the client?
An LPAR requires more disk space so an application logging filesystem in datavg can be extended. There is an unused LUN, hdisk5, on the VIO Server.
Which command (or commands) will map the drive directly to the client?
정답: D
문제3
An administrator has installed a new client partition and has used vSCSI to provide the disk for rootvg. The rootvg consists of one single disk, hdisk0, which is provided using a single SAN device presented to a dual VIO server configuration. The client virtual SCSI adapters are vscsi0 and vscsi1The administrator would like to prioritize I/O traffic for vscsi0.Running which command will achieve this?
An administrator has installed a new client partition and has used vSCSI to provide the disk for rootvg. The rootvg consists of one single disk, hdisk0, which is provided using a single SAN device presented to a dual VIO server configuration. The client virtual SCSI adapters are vscsi0 and vscsi1The administrator would like to prioritize I/O traffic for vscsi0.Running which command will achieve this?
정답: C
문제4
Consider the following extract from the command Ismap -all -npiv -fmt:
vfchost0:U9119.FHA.44ABCDE-V2-C642:47:: :NOT_LOGGED_IN;fcs2:U5803.001.9112345-P2-C7-T1:0:4::
vfchost1:U9119.FHA44ABCDE-V2C643:48:lpar02AIX:LOGGED_IN:fcs2:U5803.001.9112345-P2-C7-T1:5:a:fcsO:U9119.FHA
44ABCDE-V48-C8-T1
From this information which of the following statements is true?
Consider the following extract from the command Ismap -all -npiv -fmt:
vfchost0:U9119.FHA.44ABCDE-V2-C642:47:: :NOT_LOGGED_IN;fcs2:U5803.001.9112345-P2-C7-T1:0:4::
vfchost1:U9119.FHA44ABCDE-V2C643:48:lpar02AIX:LOGGED_IN:fcs2:U5803.001.9112345-P2-C7-T1:5:a:fcsO:U9119.FHA
44ABCDE-V48-C8-T1
From this information which of the following statements is true?
정답: C
문제5
A system has 2 LPARs and a VIO Server with networking configured as follows:
LPAR1 and LPAR2 are unable to communicate with external systems. What should be done to allow them to access the external network?
A system has 2 LPARs and a VIO Server with networking configured as follows:
LPAR1 and LPAR2 are unable to communicate with external systems. What should be done to allow them to access the external network?
정답: D
문제6
What is required on the Global Environment for Live Application Mobility to function?
What is required on the Global Environment for Live Application Mobility to function?
정답: B
문제7
What is necessary to install and configure IVM to use the network interface?
What is necessary to install and configure IVM to use the network interface?
정답: B
문제8
A single port on a physical Ethernet adapter (ent0) has failed on a VIO Server. The network devices are as follows:
When using the diagmenu command to deconfigure the physical adapter, an error occurs saying the adapter is in use.
What is the correct sequence to deconfigure the physical adapter?
A single port on a physical Ethernet adapter (ent0) has failed on a VIO Server. The network devices are as follows:
When using the diagmenu command to deconfigure the physical adapter, an error occurs saying the adapter is in use.
What is the correct sequence to deconfigure the physical adapter?
정답: D
문제9
An administrator has a Power 720 with 64GB of memory and Active Memory Expansion (AME).
An LPAR has only 10GB of memory available and an application has been sized at 15GB of memory. The administrator runs amepat to determine an efficient expansion factor. Based on the output, an expansion factor of 1.6 has been chosen.
How should this be configured in the LPAR?
An administrator has a Power 720 with 64GB of memory and Active Memory Expansion (AME).
An LPAR has only 10GB of memory available and an application has been sized at 15GB of memory. The administrator runs amepat to determine an efficient expansion factor. Based on the output, an expansion factor of 1.6 has been chosen.
How should this be configured in the LPAR?
정답: D
문제10
An administrator manages a Power 750 server for application development testing. Full system environments need to be deployed quickly to perform functional application testing. What is the fastest method for the administrator to deploy new AIX environments for the testing staff?
An administrator manages a Power 750 server for application development testing. Full system environments need to be deployed quickly to perform functional application testing. What is the fastest method for the administrator to deploy new AIX environments for the testing staff?
정답: A