최신RedHat Red Hat Certified System Administrator - RHCSA (EX200 Korean Version) - EX200 Korean무료샘플문제
시스템 호스트 이름을 구성하고 기존 NetworkManager 연결에 고정 IP 주소를 구성합니다.
Explanation:
Solution:
* Set the hostname:
hostnamectl set-hostname server1.example.com
* Configure the existing connection with a static IP:
nmcli connection modify ens160 ipv4.address 192.168.1.2/24 ipv4.gateway 192.168.1.1 ipv4.dns 1.1.1.1 ipv4.
method manual connection.autoconnect yes
* Bring the connection up:
nmcli connection up ens160
Detailed Explanation:
* hostnamectl is the correct modern command for changing the system hostname.
* nmcli is the correct tool for RHEL 10 network configuration because the old ifcfg style is removed in
RHEL 10, and NetworkManager keyfiles are the supported model.
* ipv4.method manual tells NetworkManager to use static addressing.
* connection.autoconnect yes ensures the profile activates automatically after reboot.
* nmcli connection up ens160 applies the changes immediately.
/shares/projects에 접근할 때 server1:/srv/nfs/projects를 마운트하도록 AutoFS를 구성하십시오.
Explanation:
Solution:
dnf install -y autofs
mkdir -p /shares
echo "/shares /etc/auto.shares" > > /etc/auto.master
echo "projects -fstype=nfs,rw server1:/srv/nfs/projects" > /etc/auto.shares
systemctl enable --now autofs
ls /shares/projects
Detailed Explanation:
* /etc/auto.master defines the main map.
* /etc/auto.shares defines the indirect mount entry.
* The mount happens on demand when /shares/projects is accessed.
* RHEL 10 file-system documentation includes AutoFS for on-demand mounts. ( Red Hat
Documentation )
루트 비밀번호 설정
노드2의 루트 암호를 "redhat"으로 설정하십시오. 이 작업을 수행하려면 시스템 접근 권한이 필요합니다.
***Restart the node2 machine and wait for the screen shown in Exhibit 1.

Press "e" to enter the screen shown in Exhibit 2.

The original configuration is as shown in the image. Modify the original configuration to the part highlighted in red box, as shown in Exhibit 2. Then press "Ctrl+X" to
execute the following commands:
# chroot /sysroot
# echo redhat |passwd --stdin root
# touch /.autorelabel
# sync
# exit
# reboot
지원되는 파일 시스템에 대해 주기적인 TRIM 작업을 활성화합니다.
Explanation:
Solution:
systemctl enable --now fstrim.timer
systemctl status fstrim.timer
Detailed Explanation:
* fstrim.timer schedules discard of unused blocks.
* This is useful on SSD-backed storage and thin-provisioned environments.
* RHEL 10 storage documentation explicitly documents enabling fstrim.timer. ( Red Hat Documentation )
registry.access.redhat.com/ubi10/ubi 이미지를 다운로드하고, webtest라는 이름의 루트리스 컨테이너를 실행하세요.
3600을 자세요.
Explanation:
Solution:
podman pull registry.access.redhat.com/ubi10/ubi
podman run -d --name webtest registry.access.redhat.com/ubi10/ubi sleep 3600
podman ps
Detailed Explanation:
* podman pull downloads the image.
* podman run -d starts the container in the background.
* Rootless Podman is a normal RHEL container workflow.
* RHEL 10 container documentation continues to center on Podman for image and container
management. ( Red Hat Documentation )
그룹 소유권이 admin이고 SGID 권한이 부여된 공동 관리 디렉터리 /common/admin을 생성합니다.
Explanation:
Solution:
groupadd admin
mkdir -p /common/admin
chgrp admin /common/admin
chmod 2770 /common/admin
Detailed Explanation:
* groupadd admin creates the group.
* chgrp admin assigns the group ownership.
* 2770 means:
* 2 = SGID
* 7 = owner rwx
* 7 = group rwx
* 0 = others no access
* This is a standard shared group-admin directory design.
매일 오전 2시에 backup-now.service를 실행하는 systemd 타이머를 생성하세요.
Explanation:
Solution:
Create timer unit:
cat > /etc/systemd/system/backup-now.timer < < 'EOF'
[Unit]
Description=Daily backup timer
[Timer]
OnCalendar=*-*-* 02:00:00
Persistent=true
[Install]
WantedBy=timers.target
EOF
Enable it:
systemctl daemon-reload
systemctl enable --now backup-now.timer
systemctl list-timers --all | grep backup-now
Detailed Explanation:
* OnCalendar=*-*-* 02:00:00 means daily at 02:00.
* Persistent=true runs missed jobs after boot if the system was off.
* timers.target is the normal target for timer units.
* RHEL 10 documentation includes systemd timer units as a standard scheduling mechanism. ( Red Hat
Documentation )